E-TON Beamer Manuel de service télécharger pdf (Page 39)

Beamer Rev-2.0.2 Page 39 of 55 11/21/2005

Engage the front brake a few times by pulling the brake

lever gently. Then, hold the front brake level all the

way in; while holding in, release the bleeder valve on

the front caliper to force the air out. Then, lock the

valve. Repeat this action until no more air flows out.

Torque value: 4 lbf-ft

DISASSEMBLING THE FRONT BRAKE DISK

Disassemble the front wheel.

Unscrew the three brake disk fixing bolts.

Remove the brake disk.

Torque of these M8 nuts: 14 – 22 lbf-ft

INSPECT BRAKE DISK

Measure the thickness of the brake disk.

Standard thickness: 3.6 mm

Limit: 3.1 mm

BRAKE SHOES (LINING) INSPECTION

Measure the thickness of the brake lining.

Standard thickness: 4.0 mm

Limit: 3.0 mm

NOTE: Do not get grease on the lining surface.

Bleeder Valve

www.Get2itParts.com

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 64 65

Pas de commentaire

E-TON Beamer Manuel de service Page 39