E-TON Beamer Manuel de service télécharger pdf (Page 12)

Beamer Rev-2.0.2 Page 12 of 55 11/21/2005

2.10 WHEELS AND TIRES

Inspect the tire surfaces for cuts, nails, or other sharp

objects. Check the tire pressure at cold tire condition.

The standard tire pressure is 2.5±0.3 kgf/cm2

2.11 GEAR OIL

Transmission gear oil needs to be changed every year

or after every 3000 miles of service.

The drain bolt is located at the rear of engine.

Remove the drain bolt and loosen the fill bolt to drain

the transmission gear box.

Inspect the drained oil for foreign materials. If the oil

contains a high concentration of metal shavings or

powder, disassemble the transmission for further

inspection.

Reinstall the drain bolt and refill the gear box with

100cc

/ 3.4oz of SAE 80-90 Gear Oil

Note: for best results, drain the transmission while

the engine is warm.

2.12 ENGINE STOP SWITCH

The engine stop switch is located beside the left handle bar.

In an emergency, pushing this switch will stop the engine.

The stop switch must be place in the on position, the top of the

switch pressed down, for the engine to start.

If your engine fails to start, check the switch.

Drain Bol

Fill Plug

Turn

www.Get2itParts.com

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 64 65

Pas de commentaire

E-TON Beamer Manuel de service Page 12